Yes, you can! The decision must be made before building the wall. The design must allow adequate space to safely recess the enclosure, with a 30mm gap between each side, the top and bottom of the enclosure, and the four sides of the recess. The recess must be deep enough to allow the enclosure glass to sit flush with the wall (at least 220 mm). The enclosure must be mounted on a full-motion mount, the AWM407NA, which is suitable for enclosures up to and including the DS7570. You MUST follow the instructions in this document.
NZ Office
Digi Screens
Unit 4, 1 Porters Ave, Eden Terrace, Auckland. 1024
Phone: +64(9) 827 2323
Email: contact@digiscreens.co.nz
Web: www.digiscreens.co.nz
